| 1. | Tensile Strength | 500 kg/cm2 |
| 2. | Compressive Strength | 900 -do- |
| 3. | Working Temperature | -450 c to 1000 c |
| 4. | Density | 1.2 gm/cc |
| 5. | Resistant to ultra violate rays as ultra violate pigments have been used. |
| S No. | Chemicals | 230 c | 600 c | 800 c |
| 1. | Detergents 1% | + | + | + |
| 2. | HCL 10% | + | + | + |
| 3. | HCL concentrated | - | - | - |
| 4. | Water | + | + | + |
| 5. | Sulphuric Acid (3% Diluted ) Sulphuric Acid (3% Concentrated) |
+ + |
+ + |
+ - |
| P.T.M.T. (Poly Tetra Mythylene Teraphthalate) | Other Conventional Fittings Made Of Brass/C.P. | |
| 1. | Anti-Theft Features | |
| These have no resale value. Chances of its being stolen away are very less. | These have got resale value and thus are stolen. | |
| P.T.M.T. fittings scrap cannot be remolded again. | These are easy to cast again. | |
| P.T.M.T. scrap does not mix with other plastics. | These are easy to mix with other metals. | |
| Once these fittings are fixed with arldite on their threads cannot be un-screwed. In case unscrewed these will be broken, hence cannot be re-used. | There is no solution. | |
| 2. | Maintenance Free | |
| No special tool is required to fix them | Special tool is required to fix them | |
| No thread or white paint is required while fixing. At the most Teflon Tape can be used in case mother Socket Threads are not in-tact. | Thread and white paint is required to fix them | |
| Working temperature of these fittings is from - 45ºC to 100ºC and are neutral to feel. | These will feel hot/cold while in use. | |
| Neoprin washer is being used which remains intact due to negligible friction hence gives maintenance free service for long time. | These start leaking after some time, due to friction between washer and washer seat (metal). Hence add to maintenance expenses. | |
| No effect of alkalies, dilute acids and are resistant to marine water and atmospheric effects. | These are effected by dilute acids alkalies and are affected by saline water and atmospheric humidity. | |
| These are bad conductor of heat and electricity. | These are good Conductor of heat and electricity. | |
| P.T.M.T. Ball Cocks are easy to fit and do not attract algae. So, it gives maintenance free service for long time | Brass Ball Cock start leaking after sometime due to scaling on the inner wall of Ball Cock body and on seat. | |
| P.T.M.T. Swiveling Shower holes do not get clogged because there is no effect of saline water. | C.P. Showers holes start clogging after some time | |
| 3. | Cost Effective | |
| P.T.M.T. fittings are cheaper by 50 to 60 percent than C.P. Brass standard fittings and are not stolen. | Best fittings are available in C.P. These are costly and prone to theft, hence cause lot of inconvenience clubbed with financial losses. | |
| These gives maintenance free service in the longer run. | These are not cost effective. | |
| 4. | Aesthetic View | |
| P.T.M.T. fittings are available in many beautiful shades to match the bathroom tiles and can be easily cleaned. | C.P. Brass fittings have only one colour and can't be cleaned after being rusted/scaled. | |
| 5. | Guarantee | |
| P.T.M.T. fittings are guaranteed against any manufacturing defects. | Best C.P. fittings are also guaranteed |
| Item Name | BIS Code Numbers | |
| 1. | Bib Cock Standard Bib Cock Fancy Bib Cock Long Body Stop Cock 15 mm Stop Cock 20 mm Angle Valve 15 mm |
IS 781-1984 |
| 2. | Pillar Cock | IS 1795 - 1982 |
| 3. | Push Cock 15 mm | As per IRS C/LF - 1923. |
| 4. | Ball Cock 15 mm Ball Cock 20 mm Ball Cock 25 mm |
IS 1703 - 1989 |
| 5. | Waste Coupling 31 mm Waste Coupling 38 mm |
IS 2963 - 1979 |
| 6. | Swiveling Shower | IS 6251 - 1990 |
| From : | |
| Shriram Institute for Industrial Research (A Unit of Shriram Scientific & Industrial Research Foundation, Delhi.) University Road , Delhi - 110007 |
|
| Issued To : | |
| Shakti Enterprises C-2/19, Rajouri Garden New Delhi - 110027 |
No. 000165967 (004-141-0595) Date : 15-04-2010 |
| Sample Particulars : One sample described as water cock (Bib cock) was received. | |
| S. No. | Tests | Results Obtained |
| 1. | Migration test (tested as per method given in IS:9845-867) | |
| (A) | Extractive residue with | |
| 1. | Distilled water at 40° c for 24 hrs., mg/l | 3.5 |
| 2. | 8% Alcohol at 40° c for 24 hrs., mg/l | 5.5 |
| 3. | 50% Alcohal at 40° c for 24 hrs., mg/l | 9.3 |
| 4. | 3% Acitic Acid at 40° c for 24 hrs., mg/l | 7.1 |
| 5. | Distilled water at 60° c for 2 hrs., mg/l | 4.8 |
| 6. | 8% Alcohol at 60° c for 2 hrs., mg/l | 2.9 |
| 7. | 50% Alcohol at 60° c for 2 hrs., mg/l | 5.5 |
| 8. | 3% Acitic Acid at 60° c for 2 hrs., mg/l | 8.0 |
| 9. | n-Heptane at 25 +/- 2° c for 30 minutes, mg/l | 20.5 |
| 2. | Undue Toxicity | Passes the test |
| Note : Migration test is carried out on additional sample, round shape test specimen of diameter 6.85 cm and thickness 2.0 mm provided by the party. | ||
| Authorized Signatory | ||
| Code No. | Description | Shakti (Item Code) |
| 20.96.11. | Bib Cock 15 mm | SB-1121 |
| 20.96.2 | Bib Cock Deluxe 15 mm | SB-1123 |
| 20.96.3 | Bib Cock Long Body 15 mm | SB-1124 |
| 20.97.1 | Stop Cock 15 mm | SB-1141 |
| 20.97.2 | Stop Cock 15 mm (F/T) | SB-1142 |
| 20.97.3 | Stop Cock 20 mm | SB-1143 |
| 20.98.1 | Pillar Cock 15 mm | SB-1130 |
| 20.99.1 | Push Cock 15 mm (20 mm B.S.P. Female Threads ) | SB-1136 |
| 20.99.2 | Push Cock 15 mm ( 12 mm B.S.P. female threads) | SB-1139 |
| 20.100.1.1 | Grating Doom 100 mm | SB-1111 |
| 20.100.1.2 | Grating Doom 125 mm | SB-1112 |
| 20.100.1.3 | Grating Doom 125 mm (with 31 mm waste hole) | SB-1113 |
| 7491 | Waste Coupling 31/32 mm. | SB-1101 |
| 7492 | Waste Coupling 38/40 mm | SB-1102 |
| 7495 | Ball cock 15 mm Complete with Epoxy Coated Aluminum Rod and H.D. Ball | SB-1151 |
| 7496 | Ball Cock 20 mm Complete with Epoxy Coated Aluminum Rod & H.D. Ball. | SB-1152 |
| 7497 | Ball cock 25 mm complete with Epoxy Coated Aluminum Rod & H.D. Ball. | SB-1153 |
| 7498 | Ball cock 40 mm complete with Epoxy Coated Aluminum Rod & H.D. Ball. | SB-1155 |
| 7499 | Ball cock 50 mm complete with Epoxy Coated Aluminum Rod & H.D. Ball. | SB-1156 |
| 7500 | Angle Stop Cock with Flange 15 mm | SB-1144 |
| 7501 | Swiveling Shower 15 mm | SB-1181 |
| 7502 | Shower Arm with Flange 225 mm | SB-1184 |
| 7505 | Towel Rail (450 mm) | SB-1199 |
| 7506 | Towel Rail (600 mm) | SB-1200 |
| 7507 | Shelf 450x124x36 mm | SB-1191 |
| 7510 | Flange 15 mm | SB-1126 |
| 7511 | Extension Nipple 15 mm | SB-1127 |
| Code No. | Description |
| 21.8 | P.T.M.T. BIB -COCKS & PUSH COCKS |
| 21.8.1 | It should confirm to Hydraulic Pressure tests as per I.S. 781-1979. |
| 21.8.2 | Material should have following physical properties: a) Dimensionally stable up to 100 deg. C. b) Tensile strength 500 kg/cm2. c) Compressive strength 900 kg/cm2. d) Wkg. Temperatures (-)45 deg C to (+) 100 deg C e) Density 1.2 gm/cc |
| 21.8.3 | Material should be chemically resistant to: a) Dilute hydrochloric acid 10%. b) Dilute Sulphuric acid 3% c) Ultraviolet rays. |
| 21.8.4 | After proper fixing with araldite, if effort is made to unscrew the tap, it (tap) shall come out only in broken / damaged / un-useable condition. |
| Item No. | Description | Specifi cation | Unit | R A T E S | Remarks | |
| Labour | Labour and Material | |||||
| 2146 | Providing and fixing P.T.M.T. Polytetramethelene Terephthalate Bib-Cock duly fixed at site with letters 'IR' of approved color and make duly fixed at site with appropriate non-toxic adhesive like "ARAL-DITE" (to make it anti-theft) & with following dimensions. 15 mm nominal size:85 mm long;102 mm high & 43 mm wide with 12 mm seat dia with replaceable washers & not weighing less than 90 gms. | 21.8 | Each | 2.20 | 87.00 | The rate for this item should be quoted separately in tender. |
| 2147 | Providing & fixing P.T.M.T. (PolytetraMethelene Teraphthalate Push Cocks dully fixed at site with letters "IR" of approved color & make duly fixed at site with appropriate non-toxic adhesive like "ARALDITE" to make it anti-theft) and with following dimensions. 10 mm nominal size with 12 mm (1/2) BSP threads without nipple, 80 mm long;30 mm high & 30 mm wide with 8 mm dia seat & replaceable washers; weighing not less than 47 gms. |
21.8 | Each | 2.20 | 65.00 | The rate for this item should be quoted separately in tender. |
